2017 Subaru Forester
Mileage
30,050
Service Date
3/11/2025
Services Performed
- NY INSPECTION
- SYNTHETIC OIL CHANGE- 5 QUARTS CHANGE OIL AND FILTER, LUBE CHASIS AND TOP FLUIDS
- HOOD POPS UP-LUBRICATE LATCH
- AUTOMATIC TRANSAXLE (CVT) FLUID – INSPECT – [When the vehicle is used under severe conditions, replace CVTF every 40,000 km (25,000 miles).] COOLING SYSTEM – INSPECT FRONT & REAR AXLE FLUID – INSPECT – [When the vehicle is used under severe conditions, replace every 15 months or 24,000 km (15,000 miles).] FUEL LINES – INSPECT – [When the vehicle is used under severe conditions, check every 6 months or 9,600 km (6,000 miles). This inspection is not required to maintain emission warranty eligibility and it does not affect the manufacturer's obligations under EPA's in-use compliance program.] MANUAL TRANSAXLE FLUID – INSPECT – [When the vehicle is used under severe conditions, replace every 15 months or 24,000 km (15,000miles).] V-BELT – INSPECT AIR CLEANER ELEMENT – REPLACE – [When the vehicle is used under extremely dusty conditions, the air cleaner element and A/C filter should be replaced more often.] BRAKE FLUID – REPLACE – [When the vehicle is used in high humidity area or mountain area, replace the brake fluid every 15 months or 24,000 km (15,000 miles).] CLUTCH FLUID – REPLACE – [When the vehicle is used in high humidity area or mountain area, replace the fluid every 15 months or 24,000 km (15,000 miles).] ENGINE OIL – REPLACE – [When the vehicle is used under severe conditions, replace the engine oil and engine oil filter every 3 months or 4,800 km (3,000 miles).] ENGINE OIL FILTER – REPLACE – [When the vehicle is used under severe conditions, replace the engine oil and engine oil filter every 3 months or 4,800 km (3,000 miles).] TIRES – ROTATE – [A tire should be replaced when the tread wear indicator appears as a solid band across the tread; this occurs when the remaining tread has worn to 0.063 inches (1.6mm) or less.]
- AIR CLEANER ELEMENT – Remove & Replace
- CABIN AIR FILTER – Remove & Replace
- Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
NEIL Z. gave our service a 5 star review on 3/11/2025
